THIS PRODUCT IS OUT OF STOCK

$22.95
Qty
139 Stage 11 Polished Standard Trucks Independent is Out of Stock

Description

Details

  What Size Trucks Do I Need For My Board?

What Size Trucks Do I Need For My Board?

Deck Width* Axle Independent Krux Bullet
6.65 - 7.15 6.9 in 109 - 110
7.35 - 7.85 7.6 in 129 7.6 130
7.75 - 8.25 8.0 in 139 8 140
8.00 - 8.50 8.25 in 144 8.25 -
8.25 - 8.75 8.5 in 149 8.5 150
8.50 - 10.40 8.75 in 159 - -
8.75 - 10.40 9.0 in - 9.0 -
8.88 - 10.40 9.125 in 169 - -

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid 'wheel bite'. Don’t know what 'wheel bite' is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will 'bite' and stop rolling. This often means that you go flying off your board. So if you're running bigger wheels make sure to read through this chart. While it might look like homework it's definitely more fun than hitting the pavement!

Truck Height**Wheel Range***
48.5 - 5249 - 53
52 - 53.551 - 55
53.5 - 5553 - 57
6055 - 59

If you are ordering risers for your complete, please make sure you have chosen hardware that accommodates the height of your risers. 1¼" hardware will work with ⅛” risers and 1½” is needed for ¼” risers.
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel SizeRiser SizeHardware Size 
  7 ply deck9 ply deck
49 - 55-7/8"-
55 - 581/8"1"-
57 - 601/8" - 3/8"1 1/4"1 1/4"
60 - 653/8" - 1/2"1 1/2"1 1/2"
width
139
height
55.0 mm
axle
0
hanger
0
weight
0
Product #
57982

Videos

Recently Viewed

Reviews

1
Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
Add Your Review
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
1 Total Reviews
Ride the best f##k the rest
5 out of 5
TRONG JUNIOR
Location: seal beach
Date: November 9, 2016
Best turning with control over every other truck. Makes it easier to not have those super tight trucks and tick racking around ew. Indys you can sport them as loose as you want and not compromise control. Not one other truck can claim that. Maybe ace or venture but they are way too light. The biggest misconception is a super light board the better. Wrong. I can't even ride hollowed axle agnd kingpin. I don't know the physics but standard indys are perfect weight. Me personally i like stage 9 and 10 better than 11. But my two requests of the lord or trucks would be bring back stage 5. Second bring back 8.25 trucks !! I know they'll sell iv heard somany say they wish they Didn't jump from 8 139 to 8.5 149. I forget the number but I remember loving 8.25 axle trucks. Oh and dont forget stage 5! In all sizes! !" Trust me theres a stage 5 following. Geoff rowley told me they were the best so he gave me an 8.25 set his whole truck bed is filled with indys so rad and I grinded past the axle needless to say he's right.
Recommended
1 Total Reviews