Forged Hollow Silver Standard Independent Skateboard Trucks

  $49.90/SET
Recently Viewed
Axle:
Qty

Description

Details

  Truck Sizing

What Size Trucks Do I Need For My Board?

Need some help deciding what trucks to put on your board? We’re here to help! You will notice that there are some areas of overlap on the deck width side of things. There are area’s where more than one size of truck will fit. It really comes down to personal preference, and can also depend on what size wheels you ride. Don’t stress too much about it though. Use this chart as a guideline, and you’ll be shredding in no time!

Deck Width*IndependentKruxBullet
6.20 - 7.60109 / 6.90 axle-110 / 6.90 axle or 120 / 7.20 axle
7.40 - 7.80129 / 7.60 axle7.6130 / 7.60 axle
7.80 - 8.20139 / 8.00 axle8140 / 8.00 axle
8.10 - 8.50144 / 8.25 axle8.25140 / 8.00 axle or 150 / 8.50 axle
8.25 - 8.65149 / 8.50 axle8.5150 / 8.50 axle
8.60 - 9.00159 / 8.75 axle8.5150 / 8.50 axle
8.90 - 9.50169 / 9.125 axle--
9.50 - 10.50215 / 10.00 axle--

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid ‘wheel bite’. Don’t know what ‘wheel bite’ is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will ‘bite’ and stop rolling. This often means that you go flying off your board. So if you’re running bigger wheels make sure to read through this chart. While it might look like homework it’s definitely more fun than hitting the pavement!

Truck Height**Wheel Range***
48.5 - 5249 - 53
52 - 53.551 - 55
53.5 - 5553 - 57
6055 - 59

**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel SizeRiser SizeHardware Size 
  7 ply deck9 ply deck
49 - 55-7/8"-
55 - 581/8"1"-
57 - 601/8" - 3/8"1 1/4"1 1/4"
60 - 653/8" - 1/2"1 1/2"1 1/2"
width
144
height
53.5 mm
axle
129 - 7.60 in
139 - 8.00 in
144 - 8.25 in
149 - 8.50 in
159 - 8.75 in
169 - 9.125 in
hanger
129 - 127 mm
139 - 137 mm
144 - 144 mm
149 - 149 mm
159 - 156 mm
169 - 166 mm
weight
129 - 331
139 - 338
144 - 348
149 - 358
159 - 362
169 - 379
Product #
m_33132067

Reviews

No Reviews Yet  |  Add Your Review