K5 Polished DLK Silver Standard Krux Skateboard Trucks

$21.95
Axle:
Qty

Free Shipping On Orders Over $75
Free 60-Days Returns

Description

The New and improved K5 Krux DLK Down-Low Kingpin Truck has all the improved features of our new K5 standard truck including the Pur-fect Turn, a quicker turning geometry, a new pivot shape & more durable injection molded pivot cup, re-designed hanger and sexy-ass baseplate with a revolutionary inverted kingpin that locks into a shaft-nut baseplate, for ultimate grind clearance, strength and rigidity.

Patent Pending

Details

  What Size Trucks Do I Need For My Board?

What Size Trucks Do I Need For My Board?

Deck Width* Axle Independent Krux Bullet
6.65 - 7.15 6.9 in 109 - 110
7.35 - 7.85 7.6 in 129 7.6 130
7.75 - 8.25 8.0 in 139 8 140
8.00 - 8.50 8.25 in 144 8.25 -
8.25 - 8.75 8.5 in 149 8.5 150
8.50 - 10.40 8.75 in 159 - -
8.75 - 10.40 9.0 in - 9.0 -
8.88 - 10.40 9.125 in 169 - -

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid 'wheel bite'. Don’t know what 'wheel bite' is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will 'bite' and stop rolling. This often means that you go flying off your board. So if you're running bigger wheels make sure to read through this chart. While it might look like homework it's definitely more fun than hitting the pavement!

Truck Height**Wheel Range***
48.5 - 5249 - 53
52 - 53.551 - 55
53.5 - 5553 - 57
6055 - 59

If you are ordering risers for your complete, please make sure you have chosen hardware that accommodates the height of your risers. 1¼" hardware will work with ⅛” risers and 1½” is needed for ¼” risers.
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel SizeRiser SizeHardware Size 
  7 ply deck9 ply deck
49 - 55-7/8"-
55 - 581/8"1"-
57 - 601/8" - 3/8"1 1/4"1 1/4"
60 - 653/8" - 1/2"1 1/2"1 1/2"
width
9.00
height
55 mm
axle
7.60 - 7.60 in
8.00 - 8.00 in
8.25 - 8.25 in
8.50 - 8.50 in
9.00 - 9.00 in
hanger
7.60 - 5 in
8.00 - 5.35 in
8.25 - 5.625 in
8.50 - 5.8 in
9.00 - 6.25 in
weight
7.60 - 340
8.00 - 349
8.25 - 355
8.50 - 364
9.00 - 374
Product #
m_33132446

Recently Viewed

Reviews

No Reviews Yet  |  Add Your Review