Krome Garrett Ginner Standard Krux Skateboard Trucks

  $49.90/SET
Recently Viewed
Axle:
Qty

Description

Garrett Ginner's new pro skateboard truck for Krux! Krux's signature cushions feel broken in from the start. Good for beginners or advanced shredders. #TheyTurnAndStuff

Details

  What Size Trucks Do I Need For My Board?

What Size Trucks Do I Need For My Board?

Need some help deciding what trucks to put on your board? We’re here to help! You will notice that there are some areas of overlap on the deck width side of things. There are area’s where more than one size of truck will fit. It really comes down to personal preference, and can also depend on what size wheels you ride. Don’t stress too much about it though. Use this chart as a guideline, and you’ll be shredding in no time!

Deck Width*IndependentKruxBullet
6.20 - 7.60109 / 6.90 axle-110 / 6.90 axle or 120 / 7.20 axle
7.40 - 7.80129 / 7.60 axle7.6130 / 7.60 axle
7.80 - 8.20139 / 8.00 axle8140 / 8.00 axle
8.10 - 8.50144 / 8.25 axle8.25140 / 8.00 axle or 150 / 8.50 axle
8.25 - 8.65149 / 8.50 axle8.5150 / 8.50 axle
8.60 - 9.00159 / 8.75 axle8.5150 / 8.50 axle
8.90 - 9.50169 / 9.125 axle--
9.50 - 10.50215 / 10.00 axle--

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid ‘wheel bite’. Don’t know what ‘wheel bite’ is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will ‘bite’ and stop rolling. This often means that you go flying off your board. So if you’re running bigger wheels make sure to read through this chart. While it might look like homework it’s definitely more fun than hitting the pavement!

Truck Height**Wheel Range***
48.5 - 5249 - 53
52 - 53.551 - 55
53.5 - 5553 - 57
6055 - 59

**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel SizeRiser SizeHardware Size 
  7 ply deck9 ply deck
49 - 55-7/8"-
55 - 581/8"1"-
57 - 601/8" - 3/8"1 1/4"1 1/4"
60 - 653/8" - 1/2"1 1/2"1 1/2"
width
8.00
height
55 mm
axle
8.00 - 8.00 in
8.25 - 8.25 in
hanger
8.00 - 5.35 in
8.25 - 5.625 in
weight
8.00 - 330
8.25 - 333
Product #
m_33132107

Reviews

4
Ratings Snapshot
4.8
out of 5
5 (3)
4 (1)
3 (0)
2 (0)
1 (0)
Would recommend this product.
75%
Add Your Review
4.8
out of 5
5 (3)
4 (1)
3 (0)
2 (0)
1 (0)
Would recommend this product.
75%
4 Total Reviews
yes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
5 out of 5
me
Location: Texas
Date: November 4, 2017
look good I've been waiting for these to come out so exited got them before he said on his YouTube
Recommended
BEST TRUCKS EVER
5 out of 5
T-ray
Location:
Date: November 3, 2017
These trucks are amazing plus its GARRETT GINNER'S pro model iv'e bought 2 pairs of them for me and my best friend and I landed my first ever backside 5-0 on a handrail right out of the box!!!!!!!
Recommended
Fuck yea
5 out of 5
Lochlen
Location:
Date: October 30, 2017
There beautiful
Recommended
amazing
4 out of 5
Satan🌸
Location: San Jose
Date: October 30, 2017
i haven’t tried these yet but it’s garret so it’s amazing . also, follow me on ig @666.p3r3z
4 Total Reviews