Stage 11 Forged Titanium Silver Standard Independent Skateboard Trucks
Ultra lightweight, mid-profile truck with the highest strength to weight ratio.
15% lighter than Stage XI
53.5mm tall for optimal performance and wheel clearance with wheels 54mm and under.
A356 T6 Aluminum Hanger
The best lightweight aluminum alloy heat treated to T6 condition for strength, durability, and grind feel.
Forged 6061 Aluminum Baseplate
Aircraft grade forged aluminum allows a thinner part while still maintaining high density and strength.
Solid Ti64 Titanium Axle
Ultra light weight Titanium axle saves weight while maintaining a high level of strength and rebound.
Hollow Chromoly Kingpin
Highest quality hollow Chromoly steel for durability and weight saving.
Independent Trucks are Built to Grind and Guaranteed for Life.
What Size Trucks Do I Need For My Board?
|6.65 - 7.15||6.9 in||109||-||110|
|7.35 - 7.85||7.6 in||129||7.6||130|
|7.75 - 8.25||8.0 in||139||8||140|
|8.00 - 8.50||8.25 in||144||8.25||-|
|8.25 - 8.75||8.5 in||149||8.5||150|
|8.50 - 10.40||8.75 in||159||-||-|
|8.75 - 10.40||9.0 in||-||9.0||-|
|8.88 - 10.40||9.125 in||169||-||-|
*Deck range recommendation varies depending on type and width of wheels
Do I Need Riser Pads?
When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid 'wheel bite'. Don’t know what 'wheel bite' is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will 'bite' and stop rolling. This often means that you go flying off your board. So if you're running bigger wheels make sure to read through this chart. While it might look like homework it's definitely more fun than hitting the pavement!
|Truck Height**||Wheel Range***|
|48.5 - 52||49 - 53|
|52 - 53.5||51 - 55|
|53.5 - 55||53 - 57|
|60||55 - 59|
If you are ordering risers for your complete, please make sure you have chosen hardware that accommodates the height of your risers. 1¼" hardware will work with ⅛” risers and 1½” is needed for ¼” risers.
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.
What Size Hardware Do I Need For My Board?
When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.
|Wheel Size||Riser Size||Hardware Size|
|7 ply deck||9 ply deck|
|49 - 55||-||7/8"||-|
|55 - 58||1/8"||1"||-|
|57 - 60||1/8" - 3/8"||1 1/4"||1 1/4"|
|60 - 65||3/8" - 1/2"||1 1/2"||1 1/2"|
149 - 8.50 in
159 - 8.75 in
169 - 9.125 in
149 - 149 mm
159 - 156 mm
169 - 166 mm
149 - 340
159 - 345
169 - 357