Stage 11 Hollow Silver Ano Purple Standard Independent Skateboard Trucks

  $24.95
Recently Viewed

COVID-19 UPDATE
During this time you may experience shipping delays. We have implemented a social distancing and cleaning plan as a precaution for the shipping staff and this may temporarily slow down processing of orders. Please click here to learn more about how this may affect your order.

Axle:
Qty

Description

Purple Anodized trucks by Independent. The Purple Anodized team truck features a polished silver hanger with an anodized purple baseplate, orange cushions and silver hardware. The Purple Anodized truck family comes in a size range of 139, 144, 149, and 159.

Stage 11 hollow trucks feature a hollow axle & kingpin and are 7% lighter than standard trucks.

GUARANTEED FOR LIFE!
Independent Trucks are guaranteed for life against manufacturer defect in materials or workmanship. If you think you have a defective product contact [email protected] or call 800-543-7979.

Details

  What Size Trucks Do I Need For My Board?

What Size Trucks Do I Need For My Board?

Need some help deciding what trucks to put on your board? We’re here to help! You will notice that there are some areas of overlap on the deck width side of things. There are area’s where more than one size of truck will fit. It really comes down to personal preference, and can also depend on what size wheels you ride. Don’t stress too much about it though. Use this chart as a guideline, and you’ll be shredding in no time!

Deck Width* Suggested Axle(s) Independent Krux Bullet
6.20 - 7.60 6.9 in, 7.2 in 109 / 6.90 axle - 110 / 6.90 axle or 120 / 7.20 axle
7.40 - 7.80 7.6 in 129 / 7.60 axle 7.6 130 / 7.60 axle
7.80 - 8.20 8.0 in 139 / 8.00 axle 8 140 / 8.00 axle
8.10 - 8.50 8.00 in, 8.25 in, 8.5 in 144 / 8.25 axle 8.25 140 / 8.00 axle or 150 / 8.50 axle
8.25 - 8.65 8.5 in 149 / 8.50 axle 8.5 150 / 8.50 axle
8.60 - 9.00 8.5 in, 8.75 in, 9.0 in 159 / 8.75 axle 9.0 150 / 8.50 axle
9.2 - 10.50 9.0 in, 9.125 in 169 / 9.125 axle 9.0 -

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid 'wheel bite'. Don’t know what 'wheel bite' is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will 'bite' and stop rolling. This often means that you go flying off your board. So if you're running bigger wheels make sure to read through this chart. While it might look like homework it's definitely more fun than hitting the pavement!

Truck Height**Wheel Range***
48.5 - 5249 - 53
52 - 53.551 - 55
53.5 - 5553 - 57
6055 - 59

If you are ordering risers for your complete, please make sure you have chosen hardware that accommodates the height of your risers. 1¼" hardware will work with ⅛” risers and 1½” is needed for ¼” risers.
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel SizeRiser SizeHardware Size 
  7 ply deck9 ply deck
49 - 55-7/8"-
55 - 581/8"1"-
57 - 601/8" - 3/8"1 1/4"1 1/4"
60 - 653/8" - 1/2"1 1/2"1 1/2"
width
159
height
55.0 mm
axle
144 - 8.25 in
159 - 8.75 in
hanger
144 - 144 mm
159 - 156 mm
weight
144 - 363
159 - 372
Product #
m_33132411

Reviews

No Reviews Yet  |  Add Your Review